Minor LCV Register Forum

Welcome to the new forum for the Minor LCV Register
It is currently Sat Jun 15, 2019 10:37 pm

All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon May 13, 2019 3:47 pm 
Offline

Joined: Thu Jun 08, 2017 11:15 am
Posts: 3
Location: Barton on Sea
Hi,
This is my first post so please be gentle.
I have recently bought a K reg van. It should have a steering lock but for some reason this has been taken out. It does have the correct steering column with the hole for the lock to engage.
I have managed to buy a Neimen 66 steering lock and really need help wiring it up. The lock has 6 terminals labelled as follows 30, 30, 57a, 15, 50 and 75 going clockwise looking at the back.
I would be really grateful if someone could point out what wires go where, or a picture would be great.
Thanks
Graham


Top
 Profile  
 
PostPosted: Tue May 14, 2019 7:32 am 
Offline

Joined: Sat Mar 16, 2019 8:44 pm
Posts: 14
I've also acquired a steering lock and found the following, it's different to yours, and I'll probably use a multimeter to establish what the terminals do,

https://www.mmoc.org.uk/Messageboard/vi ... 62#p511618

_________________
Image

Monte on Instagram


Top
 Profile  
 
PostPosted: Tue May 14, 2019 8:55 am 
Offline

Joined: Thu Jun 08, 2017 11:15 am
Posts: 3
Location: Barton on Sea
PoolGuy wrote:
I've also acquired a steering lock and found the following, it's different to yours, and I'll probably use a multimeter to establish what the terminals do,

https://www.mmoc.org.uk/Messageboard/vi ... 62#p511618


Thanks, I’ve seen that, as you say it’s different to mine. I was hoping someone might have the same as mine.
Graham


Top
 Profile  
 
PostPosted: Fri May 17, 2019 3:54 pm 
Offline

Joined: Sat Mar 16, 2019 8:44 pm
Posts: 14
Graham, I identified my terminals with a multimeter yesterday, it took about 5 mins and that included drinking an espresso. Certainly quicker than waiting for a response here.

_________________
Image

Monte on Instagram


Top
 Profile  
 
PostPosted: Tue May 21, 2019 8:56 am 
Offline

Joined: Thu Jun 08, 2017 11:15 am
Posts: 3
Location: Barton on Sea
PoolGuy wrote:
Graham, I identified my terminals with a multimeter yesterday, it took about 5 mins and that included drinking an espresso. Certainly quicker than waiting for a response here.

Thanks, I have done the same.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group